Laser Machine

Laser Cutting Equipment

YM-FCS1325-500X Metal Sheet Laser Cutting Machine

YM-FSC1325-500X metal laser cutting machine makes precise cuttiing through localized fuse and gasification of metal workpieces by using focused high-energy pulse laser with the aid of air blow. This laser cutter machine enjoys high precision and Its cutting speed is 60 times higher than wire-electrode cutting. The workpieces is hard to deform and with clean and smooth cutting edge for its small heat-affected area.

Features:

◆Large cutting format (1250*2500mm) allows for one-time cutting and forming of the entire sheet with higher efficiency.
◆The working table is equipped with small pneumatic wheel carriers. So the metal sheet to be cut may slide along the machine body with easy loading.
◆The electric air clutch allows for quick and easy clamp of metal sheets.
◆The cast over hanging beam is stable and rigid and guarantees smooth operation of the mechanism.
◆Focus auto-follow mechanism. Since the coiled metal sheets must be leveled before cutting, it’s nature that the metal sheets will have wavy surfaces. The focus auto-follow mechanism can ensure constant distance between the focal plane and the plane of the metal sheets to be cut, so that consistent cutting quality can be achieved. It can avoid defects caused by wavy metal surfaces.
◆With dual xenon lamp-pumped laser, which is low cost and easy to maintain. Operators can replace the consumables and maintain the product independently after two days training.
◆The external light path equips a 3X beam expander to shorten the focal depth of the laser. Thus focused energy is further concentrated to effectively improve the process speed.

Applicable materials and industries:

Applicable industry: precise machinery, hardware, steel plate processing, etc.

Applicable materials: stainless steel under 3mm thickness, carbon steel under 5mm thickness, especially suitable for stainless steel plate, iron plate, aluminium plate, brass plate, diomond saw blade etc materials. For the hard, fragile alloy material, have very excellent processing effect.

Technical Parameter

Laser Wavelength:1064nm
Max. Laser Power:500W
Spot Treatment:3X beam expanding and homogenization
Lamp Pump Source:dual xenon-lamp
Min. Sloth width:0.3mm
Max. Pulse Frequency:300Hz
Max. Cutting thickness:5mm (carbon steel) ; 3mm(stainless steel)
Travel of the Working Table:1300×2500mm
Repetitive Location precision:< 0.1mm
Targeting and Positioning:Red light preview
Laser Power Stability:<5%
Power Consumption of Main Engine:≤20kW
Power Supply:380Vac±10% three-phase four-wire system 380Vac±10%
Cooling Method:Water cooling, equipped with packaged water cooler (5 Pi)
Overall Dimension (L*W*H):3350×1800×1100mm